原油中酸性组分对油/水乳状液的影响研究

原油中的酸性组分是天然表面活性物质,影响油/水乳状液的稳定性,相关研究对采出液破乳有重要参考价值。作者研究了原油中酸性组分对油/水乳状液破乳效果、乳状液粘度、油/水接触角、界面膜强度的影响,结果如下:随w(酸性组分)从2.25%增加到2.65%,85℃时,脱水率由81.2%降低至14%,粘度由212.3mPa·s增加到1 452mPa·s,乳状液的稳定性大幅度增加;随w(酸性组分)增加,油/水接触角减小,界面膜强度增加;虽然间隔都是0.2%,w(酸性组分)为2.25%和2.45%时,油/水接触角、单滴破裂率相差较大,但w(酸性组分)为2.45%和2.65%时相差较小。     

Performance evaluation of asphalt containing layered double hydroxides with different zinc ratio in the host layer

The effects of five layered double hydroxides (LDHs) with different zinc ratio on the physical and rheological properties, chemical components, and anti-UV aging performance of asphalt were evaluated. Results show that LDHs improve the deformation resistance of asphalt at high temperature. After UV aging, LDH-modified asphalts show the smaller changes of physical and rheological properties and chemical components in comparison with asphalt, indicating the improved UV aging resistance. By comparison, the LDHs with higher ratio of zinc in the layers have the more outstanding UV reflection ability, leading to a beneficial effect in improving UV aging resistance of asphalt.     

Sonderlösungen bei der brandschutztechnischen Bewertung von Konstruktionsdetails

Special‐purpose solutions in the fire‐protective evaluation of construction details Very often components or construction details in existing buildings but also in new buildings cannot be evaluated with regard to its fire resistance ability considering established technical building regulations. There are no regulations for the evaluation of such components or construction details as these specific construction details have not been evaluated by a certified test authority. However, these components and construction details very often can be classified in fire resistance classes e. g. by evaluating fire tests, with regard to DIN 4102‐4, on the basis of similar proof of usability or only by pragmatic considerations. Since introducing the technical approval of the fire protection Eurocodes more often engineering methods of fire protection are used based on these Eurocodes by using temperature assessment in order to secure the evaluation results. Within this essay we show methods and ways of fire‐protective evaluation for components and construction details. The approach of proof including dimensions of possible upgrade measurements if necessary are being illustrated by examples of use out of practical experience. At the same time different materials such as steel, concrete and wood will be treated with different fire‐proof products. The essay is to explain ways of evaluation of components and construction details involving fire‐proof requirements including upgrade measurements also especially for existing buildings.     

Design of a General‐Purpose European Compound Screening Library for EU‐OPENSCREEN

This work describes a collaborative effort to define and apply a protocol for the rational selection of a general‐purpose screening library, to be used by the screening platforms affiliated with the EU‐OPENSCREEN initiative. It is designed as a standard source of compounds for primary screening against novel biological targets, at the request of research partners. Given the general nature of the potential applications of this compound collection, the focus of the selection strategy lies on ensuring chemical stability, absence of reactive compounds, screening‐compliant physicochemical properties, loose compliance to drug‐likeness criteria (as drug design is a major, but not exclusive application), and maximal diversity/coverage of chemical space, aimed at providing hits for a wide spectrum of drugable targets. Finally, practical availability/cost issues cannot be avoided. The main goal of this publication is to inform potential future users of this library about its conception, sources, and characteristics. The outline of the selection procedure, notably of the filtering rules designed by a large committee of European medicinal chemists and chemoinformaticians, may be of general methodological interest for the screening/medicinal chemistry community. The selection task of 200K molecules out of a pre‐filtered set of 1.4M candidates was shared by five independent European research groups, each picking a subset of 40K compounds according to their own in‐house methodology and expertise. An in‐depth analysis of chemical space coverage of the library serves not only to characterize the collection, but also to compare the various chemoinformatics‐driven selection procedures of maximal diversity sets. Compound selections contributed by various participating groups were mapped onto general‐purpose self‐organizing maps (SOMs) built on the basis of marketed drugs and bioactive reference molecules. In this way, the occupancy of chemical space by the EU‐OPENSCREEN library could be directly compared with distributions of known bioactives of various classes. This mapping highlights the relevance of the selection and shows how the consensus reached by merging the five different 40K selections contributes to achieve this relevance. The approach also allows one to readily identify subsets of target‐ or target‐class‐oriented compounds from the EU‐OPENSCREEN library to suit the needs of the diverse range of potential users. The final EU‐OPENSCREEN library, assembled by merging five independent selections of 40K compounds from various expert groups, represents an excellent example of a Europe‐wide collaborative effort toward the common objective of building best‐in‐class European open screening platforms.     

界限消融的当代公共图书馆建筑设计

公共图书馆不仅作为公共活动的重要空间,也是城市资本的重要组成部分。作为最早出现的公共建筑形式之一的公共图书馆,其理论研究却相对滞后。随着信息技术的发展,人们对文化的需求逐渐增强,城市功能的不断叠加,当代公共图书馆被赋予了更多的意义。本文正是在这一时代背景下,通过对于影响公共图书馆发展的要素进行分析,分析、预判当代公共图书馆的发展方向,以期对设计有所启示。     

Structural form-finding of bending components in buildings by using parametric tools and principal stress lines

This paper aims to provide an efficient and straightforward structural form-finding method for designers to extrapolate component forms during the conceptual stage. The core idea is to optimize the classical method of structural form-finding based on principal stress lines by using parametric tools. The traditional operating process of this method relies excessively on the designer's engineering experience and lacks precision. Meanwhile, the current optimization work for this method is overly complicated for architects, and limitations in component type and final result exist. Therefore, to facilitate an architect's conceptual work, the optimization metrics of the method in this paper are set as simplicity, practicality, freedom, and rapid feedback. For that reason, this paper optimizes the method from three aspects: modeling strategy for continuum structures, classification processing of data by using the k-nearest neighbor algorithm, and topological form-finding process based on stress lines. Eventually, it allows architects to create structural texture with formal aesthetics and modify it in real time on the basis of structural analysis results. This paper also explores a comprehensive application strategy with internal force analysis diagramming to form-finding. The finite element analysis tool Karamba3D verifies the structural performance of the form-finding method. The performance is compared with that of the conventional form, and the comparison results show the practicality and potential of the strategy in this paper.     

Integration of Adaptive Neuro Fuzzy Inference Systems and principal component analysis for the control of tertiary scale formation on tinplate at a hot mill

Scale is highly detrimental to surface quality for tinplate products. There are a large number of process variables at a typical hot mill and principal component analysis is a well-known technique for reducing the number of process variables. This paper estimates the principal components associated with the hot mill process variables and puts these through an Adaptive Neuro Fuzzy Inference System (ANFIS) to find those hot mill running conditions that will minimise the amount of scale observed on the bottom of the rolled strip. It was found that the variation observed in all the hot mill process variables could be captured through the use of just six principal components, and that using just three of these in an ANFIS was sufficient to identify those operating conditions leading to coils being produced with a consistently low scale count. Specifically, it was found that the best operating conditions for the hot mill were when the first component was lower than −0.098 the second lower than 0.8058 and the third higher than −0.482. These ranges in turn corresponded to certain hot mill temperatures that depended to some extent on the base chemistry of the incoming slab.     

刍议图书馆信息化支撑系统

图书馆是人类知识的存储地，为人们的学习、研究等活动提供重要的保障。随着社会的不断发展与进步，人们要求能够全面、高效地获取图书馆资源。这就要求图书馆具备信息资源整合能力，并且能够给用户提供一个快捷使用的信息平台，即具备图书馆信息化支撑体系，从而为用户提供更加优质、贴心的服务，从而促进图书馆的良好发展。     

Reframing Pinterest: Information Literacy for Interior Design Students

This article discusses providing information literacy to interior design students, specifically how over a few years, and several assignment iterations, we moved from a more traditional one-shot library instruction session to a creative Association of College and Research Libraries Framework-inspired assignment using Pinterest as the medium for the students' professionally relevant research project. The outcome of our instruction relied on flexible assignment planning, collaboration as faculty and librarians changed roles, and a focus on information literacy skills needed by professional designers.     

数据库垄断的成因及对策分析

学术数据库市场被少数几个出版商掌握，新的数据库商难以加入到竞争中来，因此导致了学术数据库市场的垄断问题。本文通过叙述学术数据库垄断的四个问题，即数据库定价的不合理、数据库许可权的滥用、经营者集中和数据库用户受限，提出通过开放获取、图书馆联合与立法保护来应对数据库市场的垄断问题。